Ventra Sterling-F
PRODUCT FEATURES
VENTRA STERLING F is a multi louvred ventilator that provides an economic, non powered method of ventilation, allowing the removal of large quantities of warm air and / or smoke from a building within a short period of time. The VENTRA STERLING F is a further development on the already proven VENTRA F but is a response to the increased requirements for air tightness and thermal insulation in certain building designs and applications worldwide. The Ventra Sterling F is suitable for facade fresh air supply, air and smoke extraction and also facade natural lighting. The vents are manufactured according to ISO 9001 quality control standards. The vents are formed from high quality corrosion resistant aluminium to ensure low maintenance requirements and water tightness. Various methods of operation using pneumatic or electric actuators are available. The ventilator design produces a versatile economic unit suitable for a wide range of applications. Available on large dimensions, up to 2400 x 3826 mm (width x length) for HB, 2400 x 3804 mm (width x length) for LB.
TYPICAL APPLICATIONS
Versatile scope of applications on facades, with an installation angle range of 90º. Installations: Industrial buildings, warehouses, logistics centres, shopping centres, atria, schools, stairwells, among others.
MATERIALS
Tempered aluminium, sea water- and corrosion-resistant (EN AW 5754).
Corrosion resistant bearings.
Built-in weather resistant hydrophobic tape.
DIMENSIONS
Opening width: 300 – 2400 mm
Opening height: 746 – 3826 mm (17 louvres, max.) for HB; 737 – 3804 mm (17 louvres, max.) for LB
OPENING ANGLE
Individual adjustable from 0° up to 90º
CONTROLS NATURAL VENTILATION
P1 – Single pipe compressed operation
P2 – Double pipe compressed air operation
M230V – Electric motor
CONTROLS FIRE VENTILATION
P1F – Single pipe compressed air operation with fire function
P2F – Double pipe compressed air operation with fire function
M24V -Electric motor
LOUVRES
BASES
– Single aluminium
– Double wall aluminium with insulation (just for HB)
FLANGES
S1 – Flange for single glass
S2 – Flange for double glass
S3 – Flange, 45º bended
S4 – Flate Flange
S5 – Flange for upstand, 90º bended downwards
S6 – Flange 90º bended upwards
SC – Flange for connection with other flange (vents connection) male or female connection
SCM – Flange for male connection
SCF – Flange for female connection
* Custom flange design and insulated flanges upon request
WEIGHT
Depends on dimensions and type of infill.
OPTIONS
– Custom dimensions
– Powder-coated design (any RAL colour)
– Bird or insect mesh
– Anti-fall grid 1200 J
REGULATIONS
The system has been tested and is certified in accordance with EN 12101-2.
