Fire Curtains

Bachfire Conflex

DESCRIPTION

BACHFIRE CONFLEX EI 120 is an Automatic Fire Curtain that in case of fire, limits and controls the fire on conveyor belts, minimizing not only radiation emission but also heat transfer, creating isolation from the fabric so that protection of people and goods is maximized, with classification EI 120.

The curtain is composed of fibreglass fabric coated on both sides and seamed with reinforced steel wire and fixed to a steel roller of 78 mm in diameter. Galvanized steel elements such as headbox, side guides and bottom bar (adaptable depending on the belt type). Irrigation system through a sprinklers system.

All the system is driven by a 24 V tubular motor and controlled by an electronic board, BACH’s CRM (Control and Regulation for Motor) with Special Gravity Failsafe System. The control panel for automatic curtains (CBM), with a nominal input voltage of 220 V and output voltage of 24 V. Uninterruptible Power Supply (UPS System) with autonomy up to 6 hours.

Tested and approved according to the European Standards UNE EN 1366-7:2006.

OPERATION

The system can be activated by a SHEV, fire alarm contact, internal fire and smoke detection devices, or manual emergency buttons. In the event of a fire, the BACH’s Control Panel (CBM), receives the signal alarm, and the automatic curtain deploys automatically, with the controlled and safe constant speed of descent even following total power loss on all curtains. A solenoid valve connected to BACH´s control panel can activate the irrigation system. If there is a false alarm the curtains return to the standby position automatically after resetting the alarm from the main Fire Management Systems. In case of main power loss, the curtain will remain fully retracted for up to 6 hours thanks to BACH’s battery backup system.

FABRIC

BACHFIRE TEX 1000/02: fibreglass fabric resists up to 1,100ºC. 

Grey colour.