SHEV Systems

Ventra

PRODUCT FEATURES

VENTRA is a multi louvred ventilator that provides an economic, non-powered method of ventilation, allowing the removal of large quantities of warm air and / or smoke from a building within a short period of time. The VENTRA is suitable for air feed (facade), air extraction (facade an roof) and natural lighting. The vents are manufactured according to ISO 9001 quality control standards.The vents are formed from high quality corrosion resistant aluminium to ensure low maintenance requirements and watertightness. Various methods of operation using pneumatic or electric actuators are available. The ventilator design produces a versatile economic unit suitable for a wide range of applications. Available on large dimensions, up to 2400 x 3826 mm (width x length).

TYPICAL APPLICATIONS

Versatile scope of applications on roofs and facades, with an installation angle range from 0º to 90º. Installations: industrial buildings, warehouses, logistics centres, shopping centres, atriums, among others.

MATERIALS

Tempered aluminium, sea water and corrosion resistant (EN AW 5754).

Corrosion resistant bearings.

Edge protection sealing profiles are applied so that there is no freezing, enabling the equipment to have low air permeability at the same time.

 

Note: aluminum is supplied untreated as standard. Possibility of being supplied with electrostatic painting (in any RAL color).

DIMENSIONS

Roof opening width: 300 – 2400 mm
Roof opening length: 746 – 3826 mm (17 louvres, max.)

OPENING ANGLE

Individual adjustable from  up to 90º

CONTROLS NATURAL VENTILATION

P1 – Single pipe compressed operation
P2 – Double pipe compressed air operation
M230V – Electric motor

COMBINATION SET – P1 + 230 V ou P2 + 230 V.

CONTROLS FIRE VENTILATION

P1F – Single pipe compressed air operation with fire function
P2F – Double pipe compressed air operation with fire function
M24V -Electric motor

FLAPS

BASES

– Single aluminium

– Double wall aluminium with insulation

FLANGES

S1 – Flange for single glass
S2 – Flange for double glass
S3 – Flange for roofs, 45º bended
S4 – Flange for roofs and facades
S5 – Flange for upstand, 90º bended downwards
S6 – Flange 90º bended upwards
SLS – Flange for skylight connection (different polycarbonate thicknesses)
SC – Flange for connection with other flange (vents connection) male or female connection
SCM – Flange for male connection
SCF – Flange for female connection

* Custom flange design and insulated flanges upon request

WEIGHT

Depends on dimensions and type of infill

OPTIONS

– Custom dimensions
– Powder-coated design (any RAL colour)
– Bird or insect mesh
– Anti-fall grid 1200 J. 

REGULATIONS

The system has been tested and is certified in accordance with EN 12101-2